> Search > t

     More...

     More...

Its neat, compact design makes the Fusion R not only an ideal solution for rear effects / surround applications but also as a front stereo pair where space is an absolute premium. Recommended amplifier power: 10 - 60 Watts RMS Continuous power handling: 40 Watts RMS Peak output power: 80 Watts Low frequency response: 59Hz Sensitivity: 86dB Nominal impedance: 8 ohms Frequency response: 59Hz - 20kHz High frequency drive unit: 25mm(1") Nitro-Urethane layer damped woven polyester dome, shielded neodymium magnet assembly Low frequency drive unit: 100mm (4") coated multi-fibre paper pulp cone Crossover Frequency: 2.9kHz Crossover Type: 4th order acoustic linkwitz-riley Enclosure type: Front reflex. 12mm (1/2) particle board, internally cross-braced enclosure. Shielding: Yes Volume: 2.6 litres (0.1 cubic feet) Dimensions: 210 x 140 x 160mm (8 1 / 4x 51 / 2x 61 / 4 Weight: 2.2kg (4.8lbs) Shown here in apple Price is per pairSee all the Tannoy Fusion Speaker range    More...

Its neat, compact design makes the Fusion R not only an ideal solution for rear effects / surround applications but also as a front stereo pair where space is an absolute premium. Recommended amplifier power: 10 - 60 Watts RMS Continuous power handling: 40 Watts RMS Peak output power: 80 Watts Low frequency response: 59Hz Sensitivity: 86dB Nominal impedance: 8 ohms Frequency response: 59Hz - 20kHz High frequency drive unit: 25mm(1") Nitro-Urethane layer damped woven polyester dome, shielded neodymium magnet assembly Low frequency drive unit: 100mm (4") coated multi-fibre paper pulp cone Crossover Frequency: 2.9kHz Crossover Type: 4th order acoustic linkwitz-riley Enclosure type: Front reflex. 12mm (1/2) particle board, internally cross-braced enclosure. Shielding: Yes Volume: 2.6 litres (0.1 cubic feet) Dimensions: 210 x 140 x 160mm (8 1 / 4x 51 / 2x 61 / 4 Weight: 2.2kg (4.8lbs) Shown here in apple Price is per pairSee all the Tannoy Fusion Speaker range    More...

The Tannoy i5 AW is a high quality All Weather installation loudspeaker based around a 127mm (5") point source ICT™ transducer. Suited for applications indoors or out, the i5 AW consistently delivers a powerful performance under a wide range of environmental conditions. The cabinet is weatherproof to IP33CS in EN60529. The design of the ICT drive unit addresses the two most common component failures experienced in background music and sound reinforcement systems: the tweeter and the crossover. ICT or Inductive Coupling Technology uses a wireless electromagnetic tweeter that does not require a crossover and cannot be burned out from heavy use or misuse. The ICT dome uses a plastic cone and nitrile rubber surround, further enhancing durability and long term reliability. The 90° conical dispersion of the point source ICT driver allows either vertical or horizontal mounting without compromising sound quality.Shown here in Black and WhitePrice is per speaker    More...

The Tannoy i5 AW is a high quality All Weather installation loudspeaker based around a 127mm (5") point source ICT™ transducer. Suited for applications indoors or out, the i5 AW consistently delivers a powerful performance under a wide range of environmental conditions. The cabinet is weatherproof to IP33CS in EN60529. The design of the ICT drive unit addresses the two most common component failures experienced in background music and sound reinforcement systems: the tweeter and the crossover. ICT or Inductive Coupling Technology uses a wireless electromagnetic tweeter that does not require a crossover and cannot be burned out from heavy use or misuse. The ICT dome uses a plastic cone and nitrile rubber surround, further enhancing durability and long term reliability. The 90° conical dispersion of the point source ICT driver allows either vertical or horizontal mounting without compromising sound quality.Shown here in Black and WhitePrice is per speaker    More...

Constructed around a larger version of the rigid low profile baffle design, this model utilises an additional bass unit along with the same Dual Concentric™ and SuperTweeter™ driver array used in the iw6 TDC. The increase in bass performance and power handling capability make this the ideal choice for more demanding audio systems, while the simple to use 8-way clamp mechanism ensures installation security. Quick and easy to use, the gold plated spring loaded terminals are provided with bi-wire and driver earthing options. The iw62 TDC is the premium discreet install solution for a wide range of distributed audio systems where optimum acoustic performance is essential.Frequency Response (1): (+/- 3dB) 70Hz - 51kHzLow Frequency Alignment (2): (- 6dB) 34HzRecommended Amplifier Power: 20 – 210 Watts/8 ohmsPower Handling (3): (Average) 105 Watts, (Programme) 210 Watts, (Peak) 420 WattsSensitivity 2.38 Volts @ 1 metre (1): 92dB (anechoic), 95dB (half space)Maximum SPL @ 1 metre (4): (Average) 112dB, (Peak) 118dBImpedance: 8 ohm Dispersion: 90˚Driver Complement: 1 x 25mm (1”) Titanium Tweeter, 165mm (6 1/2”) Dual Concentric™), 1 x 165mm (6 1/2”) bass driverDimensions: (Front Baffle) 473.5 x 227 x 104mm (18 5/8 x 8 15/16 x 4 1/16”), (Mounting Panel Thickness) 25mm (1”) MaximumCut-out Dimensions: 426.1 x 187.6 x 99mm (16 13/16 x 7 3/8 x 3 7/8")Rec. in-wall Mounting Volume: 30 litres (1.1 cu.ft.)Mounting Depth: 99mm (3 7/8”)Weight (each): (iw6 TDC) 5kg (11lbs)Price is per speakerNOTES: (1) Average over stated bandwidth, measured at 1m on axis in an anechoic chamber, in a critically tuned enclosure. (2) Measured ‘in-wall’. (3) Long term power handling capacity as defined in EIA standard RS – 426A. Crest factor 6. (4) Unweighted pink noise input, measured at 1m in an anechoic chamber    More...

The Dual Concentric™, a time coherent, point source and constant directivity dispersion driver design, is an ideal solution for the in-wall speaker application. The high frequency unit, centrally mounted in the throat of the main mid/bass driver, delivers an open and natural sound with a very wide imaging ‘sweet spot’. The addition of a Tannoy SuperTweeter™ extends the frequency bandwidth to over 50kHz for greater precision, tighter imaging and increased presence throughout the entire audible frequency band. Frequency Response (1): (+/- 3dB) 75Hz - 51kHz Low Frequency Alignment (2): (-6dB) 36Hz Recommended Amplifier Power: 20 – 180 Watts/8 ohms Power Handling (3): (Average) 90 Watts, (Programme) 180 Watts, (Peak) 360 Watts Sensitivity 2.38 Volts @ 1 metre (1): 91dB (anechoic), 94dB (half space) Maximum SPL @ 1 metre (4): (Average) 110dB, (Peak) 116dB Impedance: 8 ohm Dispersion: 90˚ Driver Complement: (Supertweeter™) 1 x 25mm (1”) Titanium Dome, (Dual Concentric™) 1 x 25mm (1”) Titanium Dome, 1 x 165mm (6 1/2”) bass driver Dimensions: (Front Baffle) 320 x 209 x 104mm (12 5/8 x 8 1/4 x 4 1/8”), (Mounting Panel Thickness) 25mm (1”) Maximum Cut-out Dimensions: 320 x 209 x 104mm (12 5/8 x 8 1/4 x 4 1/8") Rec. in-wall Mounting Volume: 20 litres (0.7 cu.ft.) Mounting Depth: 99mm (3 7/8”) Weight (each): (iw6 TDC) 3kg (6lbs, 6oz) Price is per speaker NOTES: (1) Average over stated bandwidth, measured at 1m on axis in an anechoic chamber, in a critically tuned enclosure. (2) Measured ‘in-wall’. (3) Long term power handling capacity as defined in EIA standard RS – 426A. Crest factor 6. (4) Unweighted pink noise input, measured at 1m in an anechoic chamber.    More...

With a 175mm (7”) cast chassis mid bass driver and WideBand™ high frequency unit this is a bi-wireable stand mount speaker of immense ability. Combining tremendous bass weight and impact with natural open voicing and sound staging. Recommended amplifier power: 20 – 100 Watts RMS Continuous power handling: 75 Watts RMS Peak output power: 225 Watts Low frequency response: 49kHz (-6dB) Sensitivity: 88dB (2.83 Volts @1 meter) Nominal impedance: 8 ohm Frequency response: 49Hz - 51kHz (-6dB) High frequency drive unit: 25mm (1”) 25-micron titanium dome, neodymium magnet system Low frequency drive unit: 175mm (7”)Multi fibre paper pulp cone Crossover Frequency: 2.7kHz Crossover Type: 2nd order LF, 3rd order HF Enclosure type: Reflex Shielding: Yes Volume: 13 litres Dimensions: 350 x 210 x 292 mm(13¾ x 8¼x 11½ inch) Additional features: 15mm particle board, internally cross braced enclosure Weight: 7kg (15.4 lbs)Price is per pairShown here in black ash    More...

With a 175mm (7”) cast chassis mid bass driver and WideBand™ high frequency unit this is a bi-wireable stand mount speaker of immense ability. Combining tremendous bass weight and impact with natural open voicing and sound staging. Recommended amplifier power: 20 – 100 Watts RMS Continuous power handling: 75 Watts RMS Peak output power: 225 Watts Low frequency response: 49kHz (-6dB) Sensitivity: 88dB (2.83 Volts @1 meter) Nominal impedance: 8 ohm Frequency response: 49Hz - 51kHz (-6dB) High frequency drive unit: 25mm (1”) 25-micron titanium dome, neodymium magnet system Low frequency drive unit: 175mm (7”)Multi fibre paper pulp cone Crossover Frequency: 2.7kHz Crossover Type: 2nd order LF, 3rd order HF Enclosure type: Reflex Shielding: Yes Volume: 13 litres Dimensions: 350 x 210 x 292 mm(13¾ x 8¼x 11½ inch) Additional features: 15mm particle board, internally cross braced enclosure Weight: 7kg (15.4 lbs)Price is per pairShown here in black ash    More...